The modern design of Medical Emergency Alarm System to be used in the homes of the old and physically handicapped. With its big red “HELP” button and associated transmitters including a portable emergency pendant, a single press of the button can start an emergency signal to be sent to the Central Monitoring Station, or an optional call to a Personal Phone Number for immediate assistance.
It features an advanced “Two Way Voice Communication” which allows the Monitoring Station to listen in to what is happening on the client’s side or to talk to the client through the built-in microphone & speaker. The Green Reset Button can also be programmed to dial non-emergency calls for 30 minutes, allowing you to enjoy a hands-free communication freedom.
Supervision is added to receive the supervisory signals from Wrist Pendants (WTR-) to indicate their proper functioning. Furthermore, CTC-1052 is specially designed with a variety of Alarm Protocols, adding its versatility for the most advanced monitored security market.
Features:
- Alarm Reporting: TCP/IP over GPRS or GSM
- Central Monitoring Communication Protocols: Contact ID, Scancom Social Alarm Format (SAF), and Tunstall Telecom Format
- Reporting to a total of 4 Central Monitoring Stations, each one can have a separate account number up to 6 digits with individual communication protocol
- Capable of programming via: Local: Through telephone set connected via a special telephone cord (supplied) Remote: Through SMS Text Message
- Supports up to 8 Home Automation Power Switch (PSS-18)
- “Two Way Hands-Free Voice Communication” allows the personnel in Central Monitoring Station to talk to you, and listen-in to what is happening on your side through the built-in microphone & speaker
- Half duplex (Push to Talk & Listen In) & Full duplex (Two-Way Conversation) speech path controlled by DTMF commands
- Hands-free call answering
- Non-Emergency Call - Can be used as a hands-free phone
- Incorporated pre-dial alert tones followed by comfort tones, to indicate that emergency communication is in progress
- Pre-dial “guard time” programmable from 0 seconds to 99 seconds
- Silent Emergency Calls with Half Duplex Listen In only for victim monitoring function
- “Help arrived” confirmation feature
- GSM band supported: 900/1800, 850/1900 MHz
- Supervision for Wrist Pendants (WTR-): Problems such as Low battery or Damage are detected in normal times so that rectifications can be made, thus ensure that the Wrist Pendent is working properly when needed.
- Mobility Check
- Automatic Check-in Report
- Fault reporting: AC Power failure, Device Low Battery, and Panel Low Battery
- A maximum of 10 devices can be added in one system including: Waterproof Wrist Transmitter, Waterproof Emergency Pendant, Passive Infrared Detector, Fixed Panic Button, Smoke Detector, Carbon Monoxide Detector, and Water Sensor
- Brightly illuminated large red Help button for easy access in an emergency
- Wall-mounting and table-top available
- Compatible with CTC-835 Programmer for both local & remote programming. Settings can be easily managed by using the built-in LCD display and keypad. Complimentary Windows-based software “Pilot-835” is provided, which allows you to program and edit the settings efficiently from a computer.
- Compatible with Windows-based “SMS Programmer” software for remote programming. Settings can be easily managed by using a PC and send SMS messages to CTC-1052 over GSM network.
Specifications:
- Power: 12V 1A switching power
- Backup battery: 7.2V 1300mAh Ni-Cd rechargeable battery
- Battery back up time: 24 hours minimum
- Speaker: 3W
- Frequency available: 433 MHz/ 868.35 MHz/ 868.6375 MHz/ 869.2375 MHz
- Range: 433 MHz or 868.35MHz: Over 200 meters in open space 868.6375MHz or 869.2375 MHz: Over 300 meters in open space
- Operating temperature: -10° to +45°C
- Humidity: up to 90% non-condensing
- Dimensions: 200.2 X 149 X 55.5 mm
Update
