Z-Communicator VST-1908

Vesta Z-Communicator VST-1908 is designed to upgrade your existing security system to add 4 Vesta cameras to PSTN control panel for video verification and send reporting over GPRS or GSM instead of PSTN.

Benefited from Vesta family’s unique advantage, movement detection and image capturing can be carried into any security system via Vesta cameras. Upon alarm event, 3 images will be captured and transmitted over GPRS/GSM network to the Central Monitoring Station and the mobile phone/email box of the user.

With the new PSTN to GPRS/GSM converter inside, VST-1908 helps you to upgrade your existing Control Panel to send reporting via TCP/IP over GPRS or GSM, instead of PSTN. It assists you to upgrade your existing system without wasting money on equipment replacement.

With added features, Vesta Camera can send an instant notification to Control Panel via alarm output when detecting a movement and furthur users can use a SMS command to arm/disarm Control Panel via status output.

With uncompromising technology, you really can benefit from this intelligent Z-Communicator to extend endless possibilities for surveillance.


Features:

• Fast deployment, plug-n-play installation
• Up to 4 Vesta cameras
• Images report through MMS/E-mail(MMS)/FTP via GPRS
• End-user notification by MMS/SMS/Email
• Remote control to arm/disarm system
• Camera image requests via authenticated SMS commands
• Advanced Image wireless link:
  - 2-Way supervised radio network, supervision every 30 minutes.
  - AES encryption key
  - 2.4GHz DSSS (Direct-Sequence Spread Spectrum)
• 1 status(arm/disarm) output, 1 status input and 1 alarm output

GPRS/GSM Medical Alarm CTC-1052RV/ CTC-1052RV Pro

Features:

• Alarm Reporting: TCP/IP over GPRS or GSM or Contact ID via SMS

• GSM band supported: 900/1800, 850/1900 MHz

• Central Monitoring Communication Protocols: Contact ID, Scancom Social Alarm Format (SAF), and Tunstall Telecom format

• Choice of reporting in Contact ID via SMS Text Message

• Reporting to a total of 4 Central Monitoring Stations, each one can have a separate account number up to 6 digits with individual communication protocol

• Capable of programming via:

Local: Through telephone set connected via a special telephone cord (supplied)

Remote: Through regular DTMF telephone or SMS Text Message

• 1 non-emergency call number - can be used as a hands-free phone

• “Two Way Hands-Free Voice Communication” allows the personnel in Central

Monitoring Station to talk to you, and listen-in to what is happening on your side through the

built-in microphone & speaker

• Half-duplex (push to Talk & Listen-In) & Full-duplex (Two-Way Conversation)

speech path controlled by DTMF commands

• Hands-free call answering

• A maximum of 10 devices can be added in one system: Waterproof Wrist Transmitter, Waterproof Emergency Pendant, Passive Infrared Detector, Fixed Panic Button, Smoke Detector, Carbon Monoxide Detector, and Water Sensor (for 1052RV Pro only)

• Silent Emergency Calls with Half Duplex Listen In only for victim monitoring function

• “Help arrived” confirmation feature

• Supervision for Talking Pendant (WTRV/ WTRVS): problems such as Low battery or Damage are detected in normal times so that rectifications can be made, thus ensure that the pendent is working properly when needed

• Mobility Check and Automatic Check-in Report

• Fault reporting: AC Power failure, Device Low Battery, and Panel Low Battery

• Compatible with CTC-835 Programmer for both local & remote programming

Specification:

• Frequency available: 1880-1900MHz (Europe) / 1920-1930 MHz (US)

• Max Range: 200 meters in open area

• Radio frequency available: 433 MHz / 868.35 MHz / 868.6375 MHz / 869.2375 MHz (other frequency available upon request)

• Radio frequency range: 433 MHz or 868.35MHz: Over 200 meters in open space

868.6375MHz or 869.2375 MHz: Over 300 meters in open space

• Power: 12V 1A switching power

• Back up battery: 7.2V 1600mAh Ni-mH rechargeable battery

• Battery back up time: 18 hours minimum

• Speaker: 3W

• Operating temperature: -20° to +50°C

• Humidity: up to 90% non-condensing

• Dimensions: 200.2 X 149 X 55.5 mm

PSTN Medical Alarm CTC-1068

CTC-1068 is a modern design of a Medical Emergency/Fire Alarm System to be used in the homes of the elderly, as well as the physically handicapped. With its large sized red “HELP” button, one press of the button can send an emergency signal to the Central Monitoring Station for immediate notification that assistance is needed.

A 16 x 2 characters backlit full text LCD display is equipped to provide user-friendly installation & operation. Furthermore, 100 time-stamped event logs are stored for user’s record and also to cross reference with the Central Monitoring Station when required.

It features an advanced “Two Way Voice Communication”, which allows the Central Monitoring Station to listen in to what is happening on the client’s side or to talk to the client through the built-in microphone & speaker.

Features:

• In compliance with UL1635, UL1637 and UL 985
• Half duplex (Push to Talk & Listen In) & Full duplex (Two Way Conversation) speech path controlled by DTMF telephone or receiver consoles using DTMF commands
• Integral ringer for hard-of-hearing users
• Full 24 hour battery backup as per UL 985
• Battery load test
• End user accessible battery compartment
• LCD display - facilitates device learning & naming processes, status and fault displays to inform user the activated/faulted zones, and real-time clock display
• 100 time-stamped event logs that can be displayed via the built-in LCD display, or remotely from the Central Monitoring Station
• Local & remote time setting/adjustment
• Hands-free answering and auto-answer option
• Communication Protocols: Contact ID, Scancom Social Alarm Format (SAF), and Tunstall Telecom Format
• Programmable both remotely from the Central Monitoring Station and locally via DTMF (tone) telephone, or via Programmer CTC-835 (sold separately)
• Reporting to a total of 4 programmed telephone numbers, and each number can have a separate account numbers up to 6 digits long
• Up to 6 telephone numbers can be stored for non-emergency calls; user can use the up & down arrow keys on the control panel to speed dial
• Voice Prompt: playing customized voice prompts in certain events
• Voice Reminder: up to 4 user-recorded daily scheduled messages of 7 sec each, and 3 remote messages of 10 sec each. When the user is away, caregiver or Central Monitoring Station may leave a voice message to remind the user the scheduled time to take medication or to do the rehab exercise; families/friends may also leave a voice message for any occasion.
• System Fault Reporting for the following: Power Failure, Power Restore, Telephone Line Fail, Telephone Line Restore, Low Battery, & Low Battery (radio devices)
• Incorporated pre-dial alert tones followed by comfort tones, to indicate that emergency communication is in progress
• Pre-dial “Guard Time” alert programmable from 0 seconds to 99 seconds
• “Help Arrived” confirmation feature
• Mobility check
• Automatic Check-in Report and System Supervision to ensure overall system functionality
• A maximum of 20 accessory devices can be added in one system with the following compatible wireless devices: Waterproof Wrist Emergency Transmitter, Waterproof Emergency Pendant, Passive Infrared Detector, Fixed Panic Button & Smoke Detector
• Wall-mounting and table-top available
• Compatible with CTC-835 Programmer for both local & remote programming. Settings can be easily managed by using the built-in LCD display and keypad. Complimentary Windows-based software “Pilot-835” is provided, which allows you to program and edit the settings efficiently from a computer
• Compatible with Talking Pendant WTRV
• Optional Voice Reporting: calling out to users’ landline or mobile phone (a voice message with the capacity of 20 secs can be recorded)

Specifications:

• Radio frequency available: 433 MHz / 868.35 MHz / 868.6375 MHz / 869.2375 MHz (other frequency available upon request)
• Radio frequency range: 433 MHz or 868.35MHz: up to 200 meters in open space/ 868.6375MHz or 869.2375 MHz: up to 300 meters in open space
• Power: DC 15V, 800 mA Adaptor
• Back up battery: 7.2V, 1600 mAH Ni-mH x 6
• Battery back up time: 24 hours minimum
• Speaker: 3W
• Demodulation: AM/FM
• Receiver bandwidth: AM:200KHZ /FM: 50KHZ
• Receiver sensitivity: < -110 dbm
• Operating temperature: -10° to +45°C
• Humidity: up to 85% non-condensing
• Dimensions: 220 x 160 x 45.5 mm