Thursday, April 21, 2011

IP Based V-Alarm System VST-1815Z


Remotely monitoring your premises

VST-1815Z is an IP V-Alarm system that offers Video Verification & Remote Look in. Compatible with Vesta Cameras, it enables you to receive important alarm images for video verification to avoid a false alarm.

Capable of adding up to 6 Vesta Cameras, you are able to view your home at anytime and anywhere. When an alarm is triggered, 3 alarm triggered images will be captured and transmitted to pre-programmed email or FTP. You also can request Vesta Camera to capture a real-time snapshot. This helps you to quickly respond to any emergency issue!

Best choice for your home
With easy installation and cost-effective advantages and innovative features, it really makes VST-1815Z the best choice for your home.

Features:
• A 20 Zone full-featured IP Panel with built-in Web Page
• Alarm event reporting:
- Modified CID alarm reporting over internet
- Image report throught Email or FTP over internet
• UPnP basic device
• Automatic configuration for Router setting that offers easier access to Web GUI from external site (by UPnP protocol)
• Polling function included as Port forwarding back-up
• Capable of remote Program, Access, and Control via Internet Browser (CGI scripts) or M2M ' Polling (XML scripts)
• Capable of remote Upgrading via internet connection
• IP Address: DHCP or Static IP programmable
• Capable of adding up to 6 PIR cameras
• 3 images captured by PIR camera upon alarm event
• Capable of adding up to 8 wired / wireless IP cameras (more cameras adding available upon
request)
• Advanced Image wireless link:
- 2-Way supervised radio network, Supervision every 30 minutes
- AES encryption key
- 2.4GHz DSSS (Direct-Sequence Spread Spectrum)
• Simplified DDNS setup
• Each zone can be individually named/edited (with a max. of 10 characters) for quick
recognition of designated area
• Full Supervision to ensure the problem-free operation of the system
• 30 time-stamped event logs
• Interference detection is available at user’ s discretion to report signal jamming

Specification:
• Image transmission: Email/ FTP
• Wireless transmission channel: 2.4GH, DSSS, AES encryption
• Power Supply: 12V 2A switching power
• Back up battery: 1600 mAh Ni-mh rechargeable battery x 6
• Battery Back-up time: 8 hours minimum
• Alarm Output: 95db @ 1M
• Frequency available: 433MHz FM / 868.35MHz FM / 868.6375MHz Narrow Band FM
• Range:433MHZ: over 200 meters in open space
868.35MHz FM or 868.6375 MHz Narrow Band FM: over 300 meters in open space
• Temperature Range: -10° to +45°C
• Humidity: up to 90% non-condensing
• Dimensions: 135 X 169 X 27 mm

Vesta Camera VST-852

Intuitive and innovative – A battery-operated PIR motion sensor combined with a
high-quality VGA and rapid image acquisition color camera

Vesta camera is plug-n-play and requires no technical knowledge to setup. No adjustment or alignment is required.

An advanced authenticated two-way encrypted wireless link (2.4GHz, DSSS) is to ensure excellent indoor coverage
and the transmission of High Resolution Color VGA images. These vivid color VGA images deliver the alarm scene in
full detail, allowing you to respond immediately.

Featuring a Sleep Mode to be entered in disarm mode, it conserves energy and ensures long battery life.

Features:
• Easy plug-n-play installation
• 3 images upon alarm event with Pre-, Alarm and Post-Alarm
• 1 image upon remote image request
• Night surveillance up to 5 meters
• Low power consumption
• Long battery life
• High resolution color VGA images
• Secure & long RF range

Specification:
• PIR detection range: 10 meters
• PIR (horizontal) detection angle: 120 degree
• Camera (horizontal) viewing angle: 60 degrees
• Lens: VGA CMOS camera, JPEG 320X240, less than 15KB per image
• Frequency: 2.4 GHz DSSS, 2-way supervised
• Long battery life
• Battery: AA 3.6V lithium battery X 2
• Battery Life: 3.3 years (3600 images)
• Dimension: 99 x 48 x 43.3 mm

0 comments:

Post a Comment